Starting at: 8,15 €
incl. 20% VAT
plus shipping and handling

Please Choose:

spine

We will gladly shorten your arrows - enter the desired length and the reference points here:

Shorten arrows

( 0,50 € )

Qty Discounts New Price
3-5 8,15 €	6-11 7,65 €	12+ 7,15 €
* Discounts may vary based on options above

Min: 3 Units: 3

Add to Cart:

Availability:
This item is available in more than one variation. Availability of your chosen variation will be shown in the shopping cart after you have added the item to it.
We try our best to match any opponents price. Click the "best price" tag on the right to inform us if you found this item cheaper elsewhere.

Model: JVD-117552
Shipping Weight: 0.02 lbs
Manufactured by: Black Eagle Arrows
For more information, please visit this product's webpage.

Ask a question

The intrepid arrow was designed for Recurve target archers. We built an affordable arrow with Black Eagle Quality designed for the Novice and Seasoned shooters alike. Fleched with 3" Feathers, including Black Eagle M Nocke (small). Points (90-70 grain break off) are NOT glued.

Please order only in multiples of 3, ie 3, 6, 9 pieces etc, otherwise you will get an error message "invalid quantity" in the shopping cart! Note: the illustrations are stock photos only. We have no influence on the color of the nocks or fletching.

Straightness 0.006"
Length 32" all Spines
Delivery incl. Nock (Micro-Nock ST 4gn) and not glued point (90-70gn Break-off)
Fleched with 3" barred feathers

Information about shortening arrows or shafts
We will gladly shorten your arrows! Simply enter the desired arrow length in the appropriate field when you choose your arrow. Unless otherwise instructed we shorten arrows from Nock Throat (=where the string sits) to end of the shaft (=no point). For measuring we always use original components. We never consider the point in our measurements. If you leave the input field blank, we deliver the arrows in stock length (full length). No subsequent changes are possible.

Black Eagle Intrepid Spine Table
spine	GPI	outer diameter	fletching
0.500	8,3	0,233" (5,92mm)	green/yellow
0.600	7,1	0,226" (5,74mm)	red/white
0.700	6,4	0,222" (5,64mm)	yellow/orange
0.800	6,0	0,218" (5,54mm)	white/yellow
0.900	5,3	0,213" (5,41mm)	blue/white
1.000	5,1	0,212" (5,38mm)
1.200	5,1	0,211" (5,36mm)