Ready assembled bow set for beginners of all ages, consisting of: Core Hit recurve riser (brown) Core Hit limbs (black) adhesive arrow rest (Avalon) string with finger protector (Core) beginner sight (Avalon) 3 matching carbon arrows (Avalon) softcas...

Beginner or leisure archer limb with black fiberglass, fits on Core risers with srew-on limbs. Attention: this limb may only  be shot with a dacron string ! find a list of possible bow sizes below: bow length (AMO) riser length limb length ...

classical wooden riser fits all Core Screw-On Limbs ideal for beginners, schools, clubs or to build a leisure bow the following table shows the possible bow sizes: resulting bow length riser length limb length 54" 19.5" 54" 58" 19.5" 58" 6...

Ready built carbon arrow from the Jet series, matched to the light draw weights of beginners and club shooters. The arrow arrives ready to shoot: fletched with 2 inch plastic vanes, fitted with a pin and a pin nock and with the point already glued in...

Beginner limbs in black fibreglass over a wood core, for bolt-on risers in wood and metal. Fibreglass over a wood core is the classic build for beginners: forgiving on the draw, robust in club use and undemanding in care. The tips are made of wood an...

Aluminium pin insert for Jet series shafts with a 4.2 mm inside diameter, in three versions graded by spine. The insert glues into the rear end of the shaft and carries the pin that the nock pushes onto. The benefit of this design shows when an arrow...

Pin nock in the small size for the pin inserts of the Jet series, in white and yellow. The nock pushes onto the pin of the insert rather than being glued into the shaft. It can therefore be swapped without tools and rotated freely to set nock alignme...

Steel glue-in point for Jet series shafts with a 4.2 mm inside diameter, adjustable in weight through two break lines. The point ships at full weight. Two break lines of 10 grain each are machined into the tip, so weight can be lowered in two steps. ...

Metal riser in 24 inches for beginners, aimed at schools, clubs and a first bow of one's own. The riser is made from die-cast aluminium and so replaces the wooden beginner riser without moving into the price range of machined risers. The plastic grip...

Plastic vane in 2 inch length, the same fletching used on the factory built arrows of the Jet series. Intended as a replacement after damage and for anyone building their arrows in a colour scheme of their own. Seven colours are available, so cock va...

mounting bolt for attaching Core screw-in limbs to Shift risers possibly also suitable for other Core risers optionally for the smaller 14.5 and 19.5 inch risers or for the larger 20 and 24 inch risers...

Over-Nocks for 5mm Core Fiberglass Arrows available in three colors Please order only in  multiples of 5 , ie 5, 10, 15 pieces etc, otherwise you will get an error message  "invalid quantity"  in the shopping cart!...